T BAILEY, INC. fabricated, finish painted, and delivered one new 6′ diameter x 97′ long furnace stack. The wall welded steel stack, including damper, was finish coated with 2 coats of high heat coatings on the exterior for the Tesoro Refinery in Anacortes, WA.
The Project
Name: Tesoro Furnace Stack
Category: Shop Fabrication, Coatings
Related Projects
Shell Puget Sound Refinery – Degassing Drum
T BAILEY, INC. fabricated, finish painted, and delivered a 14’-0” Dia. x 57’-0” long ASME Code pressure vessel for Shell’s Anacortes, WA refinery.
Casing Gerald Desmond Bridge Replacement
T BAILEY, INC. fabricated approximately 72 pieces of oscillator casing in various sizes from 1500mm to 2500 mm in diameter in typical 24’ long sections provided in both 1” and 2” carbon steel wall thicknesses for the Gerald Desmond Bridge Replacement project located in Long Beach, CA.
Barge Load Out Facility
T BAILEY’s barge loadout facility is located on the Swinomish Channel within a mile of our March Point Road, Anacortes, WA fabrication shop. The barge shown above is 180’ in length and 45’ wide with 3 each 12’6” diameter x 44’ long pressure vessels loaded for shipment to Alaska.
Harbor Enterprises Float Assembly
T BAILEY, INC. fabricated a new float assembly for Harbor Industries in Sitka Alaska c/o Transpac Marinas. The final float was made up of six each 20′ x 56′ sub-assemblies and four pile hoop float assemblies.
Swift Hydroelectric Project Surge Arresting Structure
T BAILEY, INC. fabricated and installed approx. 230 lf of 16′ diameter penstock that began with a complex square to round transition to connect to an existing point and ended in a bifurcation that split into approx. 200 lf of 11′ diameter penstock that connected to two existing points already encased in concrete.
Port Mann Bridge Piling
T BAILEY, INC. fabricated sixty-three 240′ lengths of bridge pilings for the new Port Mann Bridge in B.C., Canada.
Aberfeldie Bifurcation – BC Hydro
T BAILEY, INC. received the 2009 STI/SPFA Pipe Fabrication Award for the fabrication, finish painting, and delivery of 4 each bifurcations and 900 lf of large diameter steel penstock for the Aberfeldie Redevelopment Project in Cranbrook, BC. The fabricated pieces received a 2 coat epoxy interior coating and the exterior received 1 coat of epoxy and 1 coat of urethane.
Tesoro’s Avon Wharf Facility Pile Cap Frames
Four (4) pile cap frames and interconnecting pipe sections for replacement of the Avon Wharf facility at Tesoro’s Martinez, CA refinery. The largest frame section weighed over 164 Tons (328,000 lbs).
What are you building?
We’re designed to perform custom fabrication of heavy structural and plate products, and can directly ship oversized loads via barge, rail, or truck to your location.
Let's Discuss a Project