T BAILEY, INC. fabricated, field erected and insulated new exhaust ductwork and fabricated, field erected and painted seven steel tanks.
Related Projects
Gerald Desmond Bridge Replacement
T BAILEY, INC. fabricated approximately 72 pieces of oscillator casing in various sizes from 1500mm to 2500 mm in diameter in typical 24’ long sections provided in both 1” and 2” carbon steel wall thicknesses for the Gerald Desmond Bridge Replacement project located in Long Beach, CA.
Barge Load Out Facility
T BAILEY’s barge loadout facility is located on the Swinomish Channel within a mile of our March Point Road, Anacortes, WA fabrication shop. The barge shown above is 180’ in length and 45’ wide with 3 each 12’6” diameter x 44’ long pressure vessels loaded for shipment to Alaska.
Harbor Enterprises Float Assembly
T BAILEY, INC. fabricated a new float assembly for Harbor Industries in Sitka Alaska c/o Transpac Marinas. The final float was made up of six each 20′ x 56′ sub-assemblies and four pile hoop float assemblies.
Swift Hydroelectric Project Surge Arresting Structure
T BAILEY, INC. fabricated and installed approx. 230 lf of 16′ diameter penstock that began with a complex square to round transition to connect to an existing point and ended in a bifurcation that split into approx. 200 lf of 11′ diameter penstock that connected to two existing points already encased in concrete.
Port Mann Bridge Piling
T BAILEY, INC. fabricated sixty-three 240′ lengths of bridge pilings for the new Port Mann Bridge in B.C., Canada.
Eye of the Wind – Grouse Mountain, Vancouver B.C.
T BAILEY, INC. shop fabricated, finish painted, and delivered a new 65M tall wind tower to Grouse Mountain Resorts in Vancouver, BC in time for the grand opening ceremony to coincide with the 2010 Winter Olympic games.
Conoco Phillips Water Injection Storage Tanks
T BAILEY, INC. fabricated, finish painted and delivered 2 each 12’d x 32’l 660 BBL API 650 storage tanks for ConocoPhillips Beluga Gasfield in Alaska. The tanks were finish painted with a 3 coat epoxy interior and a 2 coat epoxy exterior system.
Golden Crossing Casing
T BAILEY, INC fabricated and delivered over 4000 lf of 99” OD x 0.787” bridge piling for the new Golden Crossing Bridge project in Langley, BC.
The Project
Name: Centralia Flue Gas Desulfurization Project
Category: Shop Fabrication
What are you building?
We’re designed to perform custom fabrication of heavy structural and plate products, and can directly ship oversized loads via barge, rail, or truck to your location.
Let's Discuss a Project